How to recycle wires and cables by copper cable granulator machine?

Copper cable granulator machine is professionally to recycle wires and cables for profit. And the process of copper cable granulator machine is easy to operate and pollution free. Now we will make a details introduction of recycling wires and cables by copper cable granulator machine.

Different kinds of scrap wires and cables

The process of copper cable granulator machine is simple. First put the wires and cables into the machine, through crushing, the wires will be cut into pieces. Then through air separation, the copper and plastic will be separated directly. And electrostatic separator can further separate the thin copper from the plastic if you require a higher separation rate. After this process, the copper recycling rate can be reaching above 99%, the separated copper will be very pure. The copper cable geanulator machine adopts dry type separation, so there is no pollution produced. Only sometimes there is some dust produced, there will be dust collector to collect it to make the factory clean. Furthermore, the copper cable granulator machine is working fully automatically. For machine operation, usually it only needs about 1-2 workers to operate.

Process of copper cable granulator machine

People have tried many ways before to recycle wires and cables, for example, use water or directly burning, but these ways are gradually not advocated nowadays because of the bad pollution effect. But recycle wires and cables by copper cable granulator machine is totally friendly way, so copper cable granulator machine becomes the best choice now for people to recycle wires and cables now.

Copper cable granulator machine and the separated copper & plastic

DOING company as a copper cable granulator machine manufacturer, which has more than ten years export experience. Our machine is factory direct sale and have quality guarantee. If you want to buy such machine or want to process scrap wires and cables, welcome to contact us.